LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2025 >> 230i >> Repair and Diagnosis >> External Pages >> Different car >> Section 15 (Air Bag Restraint Systems) >> Removal & Installation >> Steering Wheel >> Installation

Steering Wheel: Installation

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2000 BMW Z3, 2000 BMW 328i, 2000 BMW 323i, 1999 BMW Z3, and 1999 BMW M3. However, it is still accessible from the selected car via links, so may be relevant.
  1. Viewing bottom of steering wheel, if contact ring is not centered (arrows do not line up), adjust contact ring before completing steering wheel installation. See CONTACT RING  under ADJUSTMENTS.
  2. Position steering wheel onto shaft splines using reference mark for realignment positioning. At same time, accurately align column locking pins into opening in contact ring on bottom of steering wheel.
  3. Install and tighten steering wheel bolt to specification. See TORQUE SPECIFICATIONS  . Connect horn wiring. Install air bag module. Activate air bag system. Ensure system is functioning properly. See SYSTEM OPERATION CHECK  .
scientia non olet · About LEMON Manuals