23 00 Transmission in general
WARNING: This page does not describe the selected car, but rather 28 other vehicles, including the 2004 BMW M3, 2004 BMW 330xi, 2004 BMW 330i, 2004 BMW 330Ci, and 2004 BMW 325xi. However, it is still accessible from the selected car via links, so may be relevant.
TRANSMISSION FASTENER TIGHTENING TORQUE SPECIFICATIONS
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 2AZ Transmission to clutch housing | All | M12 | 76 Nm | |
| 3AZ Reinforcement plate to transmission | All | M8 | 23 Nm | |
| 4AZ Oil drain plug / filler plug | All | 50 Nm | ||
| S6S 560G / S6S420G | 52 Nm | |||
| GS6-53BZ/DZ GS6-37BZ/DZ | M18x1.5 hexagon socket | 35 Nm | ||
| GS6-37BZ/DZ / GS6-17BG | M12x1.5 | 25 Nm | ||
| GS7S47BG | 40 Nm | |||
| 5AZ Transmission extension | E83 / GS6-37DZ | M10 | 46 Nm |
TRANSMISSION FASTENER TIGHTENING TORQUE SPECIFICATIONS
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Transmission to engine | ||||
| Hex screws | All | M6 | 9 Nm | |
| All | M8 | 25 Nm | ||
| All | M10 | 49 Nm | ||
| All | M12 | 74 Nm | ||
| Screw with Torx head | All | M6 | 9 Nm | |
| All | M8 | 22 Nm | ||
| All | M10 | 43 Nm | ||
| All | M12 | 72 Nm | ||
| GS7S 47BG | M10x55 8.8 | 43 Nm | ||
| GS7S 47BG | M10x42 8.8 | 42 Nm | ||
| H-transmission / G-transmission | M12 | 73 Nm | ||
| Steel screws with Torx head N52 | H transmission | M8 | 19 Nm | |
| Steel screws with Torx head N52 | H transmission | M12 | 66 Nm | |
| 2AZ Transmission to N52 engine aluminium screws marked blue | H transmission | Replace screws Jointing torque and angle of rotation must be observed without fail | ||
| H transmission | M10x30 | Jointing torque | 20 Nm | |
| Torque angle | 90-110° | |||
| H transmission | M10x85 | Jointing torque | 20 Nm | |
| Torque angle | 180-200° | |||
| H transmission | M12 | Jointing torque | 34 Nm | |
| Torque angle | 90-110° |