23 21 Transmission Shafts
WARNING: This page does not describe the selected car, but rather 28 other vehicles, including the 2004 BMW M3, 2004 BMW 330xi, 2004 BMW 330i, 2004 BMW 330Ci, and 2004 BMW 325xi. However, it is still accessible from the selected car via links, so may be relevant.
TRANSMISSION SHAFTS FASTENER TIGHTENING TORQUE SPECIFICATIONS
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Output flange | S5D 200G / S5D 250G / S5D260Z / S5D 310Z / S6S 420G | Collar nut installed with bolt cement | ||
| Pretension | 190 Nm | |||
| Release | ||||
| Tighten down | 120 Nm | |||
| S5D 280Z / S5D 320Z | Collar nut installed with bolt cement | |||
| Pretension | 170 Nm | |||
| Release | ||||
| Tighten down | 130 Nm | |||
| S5D 390Z | Collar nut installed with bolt cement | |||
| Pretension | 200 Nm | |||
| Release | ||||
| Tighten down | 145 Nm | |||
| GS6-37BZ / GS6-17BG | Collar nut installed with bolt cement | |||
| Pretension | 170 Nm | |||
| Release | ||||
| Tighten down | 120 Nm | |||
| GS6-53DZ | Collar nut installed with bolt cement | |||
| Pretension | 200 Nm | |||
| Release | ||||
| Tighten down | 140 Nm | |||
| GS7S47BG | Collar nut installed with bolt cement | 200 Nm | ||
| 2AZ Gear to countershaft | 265 / Sport | M10 | 60 Nm |