11 22 Flywheel
WARNING: This page does not describe the selected car, but rather 50 other vehicles, including the 2006 BMW M3, 2006 BMW 330Ci, 2006 BMW 325Ci, 2005 BMW M3, and 2005 BMW 330i. However, it is still accessible from the selected car via links, so may be relevant.
FLYWHEEL TIGHTENING TORQUE SPECIFICATIONS
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Flywheel to crankshaft | ||||
| Manual transmission flywheel to crankshaft | S62/M60/1/M60/2/M62 | Do not install with screw retaining compound. Bolts are a component part of the flywheel. Screw threads oiled. | 105 Nm | |
| Manual transmission flywheel to crankshaft | M40/M42/M43/M43TU/M44/M70/S70/M73/M57TU | Replace screws | 120 Nm | |
| All others | Replace screws | 105 Nm | ||
| Automatic transmission flywheel to crankshaft | N62/N73 | Replace screws | 105 Nm | |
| All others | Replace screws | 120 Nm | ||
| Manual transmission flywheel to crankshaft | N62 | Do not install with screw retaining compound. Bolts are a component part of the flywheel. Screw threads oiled. | 120 Nm |