LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2025 >> 230i >> Repair and Diagnosis >> External Pages >> Different car >> Section 141 (Audio, Navigation, Anti-Theft And Restraints - Repair Instructions) >> AIRBAG Triggering Unit >> 65 77 551 Removing And Installing Impact Sensor For Left Or Right Side Airbag (Multiple Restraint System 4) >> Saloon/Sedan, Touring:

Saloon/Sedan, Touring:

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2006 BMW M3, 2005 BMW M3, 2004 BMW M3, 2003 BMW M3, and 2002 BMW M3. However, it is still accessible from the selected car via links, so may be relevant.

Fold up carpet in area of front seat. If necessary, remove rear compartment heating duct.

Fig 1: Removing Rear Compartment Heating Duct
G03119889Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug.

Fig 2: Disconnecting Plug
G03119890Courtesy of BMW OF NORTH AMERICA, INC.

Release screws and remove impact sensor for side AIRBAG.

Fig 3: Removing Impact Sensor For Side AIRBAG
G03119891Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Arrow (1) on impact sensor for side AIRBAG must point to sill.

Observe tightening torque, 5.5 Nm.