LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2025 >> 230i >> Repair and Diagnosis >> External Pages >> Different car >> Section 130 (Fuel System - Repair) >> Air Cleaner >> 13 72 001 Replacing Air Cleaner Element (S54)

13 72 001 Replacing Air Cleaner Element (S54)

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2006 BMW M3, 2005 BMW M3, 2004 BMW M3, 2003 BMW M3, and 2002 BMW M3. However, it is still accessible from the selected car via links, so may be relevant.

Release hose clamp (1).

Unlock plug (2) and detach from air-mass flow sensor.

Release clips (3).

Rotate upper section of intake filter housing (4) in direction of arrow and remove.

Fig 1: Locating Upper Section Of Intake Filter Housing
G03118367Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Check seal between intake hose and intake air manifold for damage, replace if necessary.

Installation: 

Insert retaining lugs (1) in openings (2).

Fig 2: Installing Retaining Lugs
G03118368Courtesy of BMW OF NORTH AMERICA, INC.

Withdraw air cleaner element and replace.

Installation: 

  1. Clean lower section of intake filter housing before installing new air cleaner element.
Fig 3: Withdrawing Air Cleaner Element
G03118369Courtesy of BMW OF NORTH AMERICA, INC.