LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2025 >> 230i >> Repair and Diagnosis >> External Pages >> Different car >> Section 13 (Steering Column - E36) >> Removal & Installation >> Steering Wheel >> Removal & Installation (Without AIRBAG)

Removal & Installation (Without AIRBAG)

WARNING: This page does not describe the selected car, but rather 61 other vehicles, including the 2002 BMW Z3, 2002 BMW M Roadster, 2002 BMW M Coupe, 2001 BMW Z3, and 2001 BMW M Roadster. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Be careful not to damage turn signal cancelling cams. Set turn signal to center position.
  1. Remove BMW emblem.
  2. Unscrew screw. Mark position of steering wheel relative to steering spindle. Pull off steering wheel. See Fig 1 .
  3. Coat slip ring with grease. See Fig 2 .
  4. To install, reverse removal procedure. Tighten screw to specification. See TORQUE SPECIFICATIONS  .
Fig 1: Removing Steering Wheel
G00173907Courtesy of BMW OF NORTH AMERICA, INC.
Fig 2: Locating Slip Ring
G00173908Courtesy of BMW OF NORTH AMERICA, INC.