Master Cylinder: Reassembly
WARNING: This page does not describe the selected car, but rather 92 other vehicles, including the 2002 BMW Z3, 2002 BMW M Roadster, 2002 BMW M Coupe, 2001 BMW Z3, and 2001 BMW M5. However, it is still accessible from the selected car via links, so may be relevant.
- Reassemble piston assemblies using thin coating of brake assembly lubricant. Install piston assemblies into cylinder bore, using Guide Sleeve (34-3-000) to prevent seal damage.
- Push piston fully forward and install plug. Install retaining ring in master cylinder bore. Replace "O" ring between master cylinder and brake booster. Bench bleed master cylinder before installation.