Activation of stepper motor controllers
WARNING: This page does not describe the selected car, but rather 37 other vehicles, including the 2006 BMW 330Ci, 2006 BMW 325Ci, 2005 BMW M3, 2005 BMW 330xi, and 2005 BMW 330i. However, it is still accessible from the selected car via links, so may be relevant.
The AHL control unit sends the reference values for the swivel modules (values relating to the position of the swivel modules and the speed of swivel movement) to the stepper motor controllers. The AHL control unit calculates the nominal values on the basis of the following input signals:
- Car road speed
- Steering angle (at speeds up to 50 km/h, depending on programming)
- Yaw rate (50 km/h upwards, see "Steering angle sensor and DSC sensor" above)