LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2025 >> 230i >> Repair and Diagnosis >> External Pages >> Different car >> Section 102 (General Electrical System - Repair) >> Switch >> 61 31 033 Removing and installing light switch unit

61 31 033 Removing and installing light switch unit

WARNING: This page does not describe the selected car, but rather 16 other vehicles, including the 2006 BMW 330Ci, 2005 BMW 330xi, 2005 BMW 330i, 2005 BMW 330Ci, and 2004 BMW 330xi. However, it is still accessible from the selected car via links, so may be relevant.

Unclip left wooden finisher,

refer to 51 16 221 REPLACING A CLIPPED-IN TRIM (DECORATIVE STRIP ON PANEL FOR INSTRUMENT PANEL, FRONT OR REAR DOOR) .

Remove left glove box, refer to 51 16 350 REMOVING AND INSTALLING LEFT GLOVE BOX .

Release screws (1).

Fig 1: Releasing Screws
G03125168Courtesy of BMW OF NORTH AMERICA, INC.

Press switch unit up a little through glove box aperture and then slide back.

Fig 2: Pressing Switch Unit Up A Little Through Glove Box Aperture
G03125169Courtesy of BMW OF NORTH AMERICA, INC.

Unlock plug and remove.

Fig 3: Removing Plug
G03125170Courtesy of BMW OF NORTH AMERICA, INC.