LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2025 >> 230i >> Repair and Diagnosis >> External Pages >> Different car >> Section 100 (Seats - Repair) >> Rear seat, through-loading >> 52 26... Removing and installing/replacing fixture for roller blind on rear seat (through-loading system) on left/right

52 26... Removing and installing/replacing fixture for roller blind on rear seat (through-loading system) on left/right

WARNING: This page does not describe the selected car, but rather 16 other vehicles, including the 2006 BMW 330Ci, 2005 BMW 330xi, 2005 BMW 330i, 2005 BMW 330Ci, and 2004 BMW 330xi. However, it is still accessible from the selected car via links, so may be relevant.

Unclip cover (1) on both sides towards top.

Fig 1: Unclipping Cover On Both Sides Towards Top
G03124991Courtesy of BMW OF NORTH AMERICA, INC.

Unfasten screws (2).

Installation: 

  1. Clips (1) must not be damaged.
  2. Fit opening of cover for upper backrest edge.
    Fig 2: Installing Upper Backrest Edge Cover
    G03124992Courtesy of BMW OF NORTH AMERICA, INC.