LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2025 >> 230i >> Repair and Diagnosis >> External Pages >> Different car >> Section 10 (Engine Controls - Removal, Overhaul & Installation) >> Fuel Systems >> Intake Air Temperature Sensor >> Removal & Installation (V8)

Removal & Installation (V8)

WARNING: This page does not describe the selected car, but rather 82 other vehicles, including the 2006 BMW M3, 2006 BMW 330Ci, 2006 BMW 325Ci, 2005 BMW M3, and 2005 BMW 745i. However, it is still accessible from the selected car via links, so may be relevant.

Remove throttle body. See THROTTLE BODY . Disconnect intake air temperature sensor electrical connector. Press locking tab on side of temperature sensor. Remove temperature sensor from intake manifold. To install, reverse removal procedure.

Fig 1: Removing Intake Air Temperature Sensor (V8)
G98D11307Courtesy of BMW OF NORTH AMERICA, INC.