LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2025 >> 230i >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (Abs/Traction Control - Repair (E46)) >> Removal & Installation >> DSC Pressure Sensor ("H" & "V") >> Installation

DSC Pressure Sensor ("H" & "V"): Installation

WARNING: This page does not describe the selected car, but rather 34 other vehicles, including the 2004 BMW M3, 2004 BMW 330xi, 2004 BMW 330i, 2004 BMW 330Ci, and 2004 BMW 325xi. However, it is still accessible from the selected car via links, so may be relevant.
  1. To install, reverse removal procedure. Tighten sensors and brake lines to specification. See TORQUE SPECIFICATIONS .
  2. After completing work, bleed brake system. See BASIC BLEEDING PROCEDURES .
  3. After replacing a pressure sensor, carry out a calibration with Diagnosis and Information System (DIS) under menu item "Service Functions".
scientia non olet · About LEMON Manuals