Install charge air temperature sensor
NOTE:
RISK OF DAMAGE
Contaminant or foreign body .
Contamination can result in malfunctions, loss of function or leaks .
Contaminant or foreign body .
Contamination can result in malfunctions, loss of function or leaks .
- Adhere to the utmost cleanliness.
- Protect components from contamination e.g. by covering.
- Close off line connections with seal plugs.
- Check the sealing rings (1) on the charge-air temperature sensor for damage, replace if applicable.
- Insert and install the charge air temperature sensor (2).
- Tighten the charge-air temperature sensor (2) using the special tool 0 496 142 (11 8 850)
.TIGHTENING TORQUES SPECIFICATION
Charge air temperature sensor on charge air line Sensor Tightening torque 1.8 Nm - Connect connectors (1) and lock.
The connector (1) must engage audibly.
Follow-up work
- Refer to INSTALLING ACOUSTIC COVER .