Install fan cowl

• Thread guides (1) into the radiator.
• Thread guides (2) into the charge air cooler.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Carefully  insert and install the fan cowl (3) in arrow direction.
• Make sure that the lock (2) snaps in audibly.
• Tighten down screw (1).
  TIGHTENING TORQUE SPECIFICATION
  
  

  Fan cowl with electric fan on radiator
  TS6x20	Tightening torque	7 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Connect connectors (2) and lock.

  The connector (2) must engage audibly.

• Connect connectors (1) and lock.

  The connector (1) must engage audibly.

  Courtesy of BMW OF NORTH AMERICA, INC.

• If installed:  Attach the coolant line (1) to the clamps (arrows).
• Lock clamps (arrows).

  Courtesy of BMW OF NORTH AMERICA, INC.

• If installed:  Attach the transmission oil line (2).
• Feed in and install the transmission oil line (2).
• Lock holder (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING THE REAR TOP CROSS CONNECTION .
• Refer to INSTALLING UPPER CROSS CONNECTION .
• Refer to INSTALLING THE COVER FOR CENTRAL ENGINE COMPARTMENT .
• Refer to INSTALLING THE FRONT HOOD SEAL .