Installing the control unit for the optional equipment system (SAS)

• Position the control unit for optional equipment system (SAS) (1)  .
• Replace the plastic nuts (3)  .

  Parts:  Plastic nuts

• Insert and tighten plastic nuts (3)  .
  TIGHTENING TORQUE SPECIFICATION
  
  

  Control unit for the optional equipment system (SAS) to the holder
  Replace plastic nut.	Tightening torque	4 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Connect the plug connection (2)  .

Follow-up work 

• Refer to INSTALLING THE TRIM PANEL FOR THE PEDAL ASSEMBLY .
• Refer to PROGRAM/ENCODE THE OPTIONAL EQUIPMENT SYSTEM (SAS) .