Remove hydraulic unit

Preliminary work 

• Refer to INSTALLING BRAKE PEDAL TENSIONER .

• Disconnect plug connection (1).
• Loosen screw (1).

  Courtesy of BMW OF NORTH AMERICA, INC.

  NOTE: TECHNICAL INFORMATION 
  Do not interchange brake lines. If necessary, mark the brake lines before disassembly.
  Note various equipment specifications with different line seizure.
  Do not bend brake lines.
  Close off connecting bores with seal plugs.

  Courtesy of BMW OF NORTH AMERICA, INC.

• (1) Unfasten brake lines.
• Remove hydraulic unit (1).

  Courtesy of BMW OF NORTH AMERICA, INC.