Install the TRSVC control unit

• Insert TRSVC control unit (3) and position correctly.
• Replace nuts (2).

  Parts:  Nuts

• Tighten nuts (2).
  TIGHTENING TORQUES SPECIFICATION
  
  

  TRSVC control unit to body
  Nut	Tightening torque	8.0 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Connect connectors (1) and lock.

Follow-up work 

• Refer to INSTALLING LUGGAGE COMPARTMENT WHEEL ARCH TRIM PANEL .
• Refer to INSTALLING LOADING EDGE TRIM .
• Refer to INSTALLING LUGGAGE COMPARTMENT FLOOR COVERING .
• Refer to ENCODING/PROGRAMING CONTROL UNIT(S) .
• Refer to CHECKING THE REPRESENTATION OF THE VEHICLE IN THE CID .