Installing the top view camera
- Install and correctly position the top view camera (4).
- Connect connectors (3) and lock.
- Tighten down screws (2).TIGHTENING TORQUES SPECIFICATION
Top view camera to vehicle exterior mirror screw Tightening torque 0.85 Nm - Push lower section of the mirror housing (1) in the direction of arrow to the front and position it correctly.
- Tighten screw (1) on the lower section of the mirror housing (2).TIGHTENING TORQUES SPECIFICATION
Housing to vehicle exterior mirror tightening torque 0.85 Nm
Follow-up work
- Refer to INSTALLING THE RETAINING RING ON THE OUTSIDE REARVIEW MIRROR .
- Refer to INSTALLING THE EXTERIOR MIRROR ADJUSTMENT DRIVE .
- Refer to INSTALLING THE PROTECTIVE CAP OF THE EXTERIOR VEHICLE MIRROR .
- Refer to INSTALLING THE MIRROR GLASS .
- Refer to ENCODING/PROGRAMING CONTROL UNIT(S) .