Installing the rear right ultrasonic sensor

NOTE: Description is for left component only. Procedure on the right side is identical.

Install the rear ultrasonic sensor

Check decoupling ring (1) for damage.
The decoupling ring (1) must not be missing.

Courtesy of BMW OF NORTH AMERICA, INC.
Position the ultrasonic sensor (2) correctly and engage it in the detents (1).
Connect connectors (3) and lock.

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work

Refer to INSTALLING THE REAR BUMPER COVER .
Refer to INSTALLING TAIL LIGHT ON LEFT AND RIGHT SIDE PANEL .
Refer to INSTALLING THE TRIM IN THE WATER CHANNEL ON THE LEFT AND RIGHT .
Refer to INSTALLING THE LEFT AND RIGHT LUGGAGE COMPARTMENT WHEEL ARCH TRIM PANEL (PARTIALLY REMOVED) .
Refer to INSTALLING LOADING EDGE TRIM .
Refer to INSTALLING LUGGAGE COMPARTMENT FLOOR COVERING .