Install the mechanics of the panorama glass roof
NOTE:
Description is for left component only. Procedure on the right side is identical.
- Feed mechanics (1) into the slide/tilt sunroof frame and attach the driver (2) .
- Push the mechanics (1)
further forwards into the slide/tilt sunroof frame.
- Push the mechanics (1) into the slide/tilt sunroof frame (2) up to the limit position.
- Push the slider (3)
further forward until they are found between the marks (4)
on the mechanics.
- Guide the stopper of the mechanics (1)
into the slide/tilt sunroof frame (2)
and position.
- Feed the limit position of the mechanics (1)
into the recess on the slide/tilt sunroof frame and move in arrow direction until the retaining lug (2)
engages.