LEMON Manuals
: Even more car manuals for everyone
Home
>>
BMW
>>
2025
>>
230i
>>
Repair and Diagnosis (Single Page)
>>
Body & Frame
>>
Door Locks
>>
Body Equipment -- Repair (G42) (2 Of 2)
>>
51 71 Gaskets And Loose Body Parts
>>
51 71 018 Removing and installing/replacing right underbody protection
>>
Installing the undershield on the right side
Installing the undershield on the right side
NOTE:
Description is for left component only. Procedure on the right side is identical.
Installing the undershield on the sides
Insert the undershield (1).
Tighten all bolts and nuts (arrows).
TIGHTENING TORQUE SPECIFICATION
Undershield, side
Hexagon screw
Tightening torque
2.6 Nm
Plastic nut
Tightening torque
2.6 Nm
Courtesy of BMW OF NORTH AMERICA, INC.