Remove the seat cover for the front seat

NOTE: Description is for left component only. Procedure on the right side is identical.

• Loosen all clamp on the trim wires (1).
• Remove any remaining clamp from the seat cover and the upholstery.
• Thread out rubber band (2).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Loosen all clamps on the trim wires 1.
• Remove any remaining clamp from the seat cover (2) and the upholstery.
• Remove the seat cover (2) from the upholstery.

Courtesy of BMW OF NORTH AMERICA, INC.