Install head unit

• Connect and lock the connector (3)  to the head unit (4)  .
• Position the cable bracket (2)  correctly and engage it in the detent (1)  .

  Courtesy of BMW OF NORTH AMERICA, INC.

  NOTE: RISK OF DAMAGE 
  Damage to the instrument cluster (KOMBI) or the head unit 
  A ground offset can occur when releasing and connecting the cables. This can generate currents that render the instrument cluster (KOMBI) or the head unit unusable. 

  • When releasing: First release the APIXdata cable (blue).
  • When connecting: Connect the APIXdata cable (blue) last.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Connect and lock all the connectors in the marked area with the head unit (1)  in correct assembly sequence.

  All cables must be routed correctly.

• Feed in the head unit (2)  .
• Tighten down screws (1)  .
  TIGHTENING TORQUE SPECIFICATION
  
  

  Head unit to function carrier
  Thermoplastic oval-head screw	Tightening torque	1.8 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING THE DECORATIVE TRIM FOR THE CONTROL PANEL .
• Refer to INSTALLING RADIO OPERATING UNIT AND AIR CONDITIONING CONTROL PANEL .
• Refer to INSTALLING DECORATIVE STRIP ON CENTER OF DASHBOARD .
• Refer to ACTIVATING VEHICLE ELECTRICAL SYSTEM .