Install front axle differential

Check the O-ring (1) and replace if necessary.
Coat the O-ring (1) with front axle transmission oil.

Courtesy of BMW OF NORTH AMERICA, INC.
Position front axle differential (3).
Make sure marked screws are installed in correct installation locations:
- Bolts (1) M12x55
- Bolt (2) M 12x105

Tighten down screws (1) and (2).

TIGHTENING TORQUE SPECIFICATION

Front axle final drive to motor oil pan
M12	tightening torque	140 Nm

Courtesy of BMW OF NORTH AMERICA, INC.