12 41 041 Replacing the engagement solenoid switch

Preliminary work: 

• Switch off ignition.
• Remove STARTER MOTOR .

Courtesy of BMW OF NORTH AMERICA, INC.

Slacken nut (1).

Remove cable head (2).

Tightening torque 12 41 1AZ .

Courtesy of BMW OF NORTH AMERICA, INC.

Unscrew the screws (1).

Remove the solenoid switch (1) and the spring (2).

Detach the bolt (3).

Installation note:

Check the bolt (3) for wear and grease the bolt.

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work: 

• Install STARTER MOTOR .