Installing the right C-pillar trim panel

NOTE: Description is for left component only. Procedure on the right side is identical.

NOTE: Schematic diagram is for example purposes. Some parts may differ in certain details.

Check the clamps (1) on the C-pillar trim panel (2) for damage and replace if necessary.

Courtesy of BMW OF NORTH AMERICA, INC.
Position the C-pillar trim panel (2) insert it below the sealing lip of the door weather strip and clip it in with the clamps (3).
Tighten down screw.
Clip in the cover (1).

Courtesy of BMW OF NORTH AMERICA, INC.