Installing the left and right C-pillar trim panel

NOTE: Description is for left component only. Procedure on the right side is identical.

NOTE: Schematic diagram is for example purposes. Some parts may differ in certain details.

• Check the clamps (1) on the C-pillar trim panel (2) for damage and replace if necessary.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Position the C-pillar trim panel (2) insert it below the sealing lip of the door weather strip and clip it in with the clamps (3).
• Tighten down screw.
• Clip in the cover (1).

Courtesy of BMW OF NORTH AMERICA, INC.