5164 Front Panel, Front End
5164 TIGHTENING TORQUE OVERVIEW
| Top front cross connection to hood lock support | ||
| screw | tightening torque | 11.8 Nm |
| Front reinforcement strut | ||
| screw | tightening torque | 24 Nm |
| Hood lock support to support for bumper cover | ||
| Hexagon screw M6x16 | tightening torque | 11.8 Nm |
| Air flap control/Brake ventilation duct | ||
| Oval-head screw | tightening torque | 4.0 Nm |
| Holder for the external radiator on support for lock | ||
| screw | tightening torque | 11.8 Nm |
| Front cross connection | ||
| Screw | tightening torque | 11.8 Nm |
| Front-end strut | ||
| Screw | tightening torque | 56 Nm |
| Rear top cross connection to wheel arch carrier support | ||
| M10x50 screw Replace screw. |
Snug torque | 56 Nm |
| Angle of rotation | 90° | |
| Rear cross connection at the top of the hood lock support | ||
| Hexagon screw M6x20 | tightening torque | 8 Nm |