Install the bottom left and right b-pillar trim panel

NOTE: Description is for left component only. Procedure on the right side is identical.

• Check the clips (1) for damage and replace if necessary.

  The clips (1) must not be damaged or missing.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Guide in the lower B-pillar trim panel (1) and connect the associated connector if necessary.
• Clip the lower B-pillar trim panel (1) into the clips (2).
• Position the lower B-pillar trim panel (1) correctly at the edge protection in the front and rear.

Courtesy of BMW OF NORTH AMERICA, INC.