If installed: Install the right and left torsion struts

• Insert and install the torsion strut (3) on the left.
• Replace screws (2).

  Parts:  Screws

• Tighten down screws (2).

  Courtesy of BMW OF NORTH AMERICA, INC.

  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Torsion strut to mounting
  M12 Replace screws.	Tightening torque	100 Nm
  	Angle of rotation	90°

• Tighten nut (1).
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Torsion strut to compression strut
  M8	Tightening torque	28 Nm

• Insert and install the torsion strut (3) on the right.
• Replace screws (2).

  Parts:  Screws

• Tighten down screws (2).
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Torsion strut to mounting
  M12 Replace screws.	Tightening torque	100 Nm
  	Angle of rotation	90°

• Tighten nut (1).

Courtesy of BMW OF NORTH AMERICA, INC.

TIGHTENING TORQUE SPECIFICATIONS

Torsion strut to compression strut
M8	Tightening torque	28 Nm