Install striker for tailgate latch

• Install the striker for the tailgate latch (2).
• Tighten the screws (1).
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Striker to rear lid
  screw	Tightening torque	18.5 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING THE TAILGATE TRIM PANEL .
• Refer to MOUNTING BOTH TRIMS FOR THE REAR WINDOW FRAME ON THE SIDE .
• Refer to INSTALLING THE TRIM FOR THE TOP REAR WINDOW FRAME .
• Refer to INSTALLING BOTH TRUNK LID COVERS .
• Refer to INSTALLING THE TRUNK LID LIGHT .
• Refer to INSTALLING THE POWER TAILGATE SWITCH .