Removing the airbag sensor on the left B-pillar
WARNING:
Pyrotechnic components
.
Danger! Immobilization period-threatening injuries!
Danger! Immobilization period-threatening injuries!
- All work on pyrotechnic parts may be carried out by technically experienced and appropriately trained personnel only.
- Replace any damaged part or ones that have been dropped.
- For additional information see: 72 00 SAFETY REGULATIONS ON HANDLING COMPONENTS WITH GAS GENERATORS .
NOTE:
Description is for left component only. Procedure on the right side is identical.
Preliminary work
- Refer to DEACTIVATING THE 48 V ELECTRICAL SYSTEM .
- Refer to DISCONNECTING THE NEGATIVE BATTERY CABLE OF THE SYSTEM BATTERY
- Refer to REMOVING FRONT ENTRANCE COVER STRIP .
- Refer to REMOVE REAR ENTRANCE COVER STRIP .
- Refer to REMOVING THE B-PILLAR TRIM PANEL UPWARDS .
- Refer to REMOVING THE LOWER B-PILLAR TRIM PANEL .
- Unlock the plug connection (3) and disconnect it from the airbag sensor (1) on the left B-pillar.
- Loosen screw (2) .