Installing washer fluid reservoir

• Connect all connectors (1)  .
• Clip the cable into the washer fluid reservoir (3)  (arrows).
• Connect the hose pipe (2)  and lock it.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Feed in the washer fluid reservoir (1)  to the back in the holders (2)  .

  Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten down screw (1)  .
  TIGHTENING TORQUE SPECIFICATION
  
  

  Washer fluid reservoir
  tightening torque		8 Nm

• Clip the hose pipe (2)  into the washer fluid reservoir (3)  .

  Courtesy of BMW OF NORTH AMERICA, INC.

• Clip the filler channel (1)  downwards into the washer fluid reservoir (2)  .

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING THE REAR SECTION OF THE FRONT WHEEL ARCH COVER .
• Refer to INSTALLING FRONT LEFT OR RIGHT WHEEL .
• Refer to INSTALLING THE MOUNT OF THE HOOD SEAL ON THE RIGHT .
• Refer to INSTALLING THE REAR RIGHT ENGINE COMPARTMENT COVER .
• Refer to INSTALLING THE CENTER ENGINE COMPARTMENT COVER .