Installing the water supply to the rear left and right light

NOTE: Description is for left component only. Procedure on the right side is identical.

Installing the water channel on the tail light

Check

Check the detents (1) of the water channel on the tail light (2) for damage.

Courtesy of BMW OF NORTH AMERICA, INC.

Result

» The detent is damaged.

Measure
- Replace the water channel on the tail light (2).
Fit the water channel on the tail light (1).
Clip in the water channel on the tail light (1) with the detents (2) and (3).

G16414034

Courtesy of BMW OF NORTH AMERICA, INC.