Installing luggage compartment wheel arch trim panel left and right partially
NOTE:
Description is for left component only. Procedure on the right side is identical.
Installing the emergency release handle for the tailgate:
NOTE:
Schematic diagram is for example purposes. Some parts may differ in certain details.
- Attach the Bowden cable (2).
- Fasten the emergency release handle (1) for the tailgate to the holder.
Partially installing the Install luggage compartment wheel arch trim panel on left:
- Feed the left luggage compartment wheel arch trim panel (2) in the rear area under the sealing lip of the tailgate seal.
- Attach Bowden cable (4) and clip in the emergency release (3).
- Fasten expanding rivet (1).