Secure the wiring harness for the EPS on the front axle support

Position wiring harness (1).
Secure wiring harness (1) in areas (2).

Courtesy of BMW OF NORTH AMERICA, INC.
Connect the wiring harness (3) to the retaining bracket.
Secure cable bracket (1) in areas (2) on front subframe.

Courtesy of BMW OF NORTH AMERICA, INC.
Connect and lock connectors (1) and (2).

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: TECHNICAL INFORMATION
Different variants may be installed depending on the vehicle equipment.

Version C: Secure wiring harness

Position wiring harness (1).
Fasten wiring harness (1) in areas°(2)°.

Courtesy of BMW OF NORTH AMERICA, INC.
Connect the wiring harness (3) to the retaining bracket.
Fasten cable holder (1) in areas (2) on front subframe.

Courtesy of BMW OF NORTH AMERICA, INC.
Connect and lock connectors (1) and (2).

Courtesy of BMW OF NORTH AMERICA, INC.