Replacing left and right water pipe element
- Replace water guide element (1)
on the left and right.
Parts: Water guide element
Do not mix up the left and right water guide elements.
- Clean bonding surface.
CONSUMABLE SPECIFICATION
| Cleaning agent R2 | 500 ml | 83190417324 |
- Detach the liner from the water pipe element (1)
.
- Align the water pipe element (1)
to the mark (dashed line) of the A-pillar (3)
.
The water guide element (1) must remain under the mount (2) of the hood seal as shown.
- Align the water guide element (1) flush with the A-pillar (3) as shown and press firmly into place.