Install the center console
NOTE:
To provide a better overview: Schematic diagram with partially hidden components.
- Install the center console (1) and feed in the cables.
- Correctly position the center console (1) .
- Fasten the wiring harness on the center console (1)
and connect and lock the present plug connections.
- Connect plug (1) .
- Fasten the connector housing (2)
on the center console.
- Tighten nuts (1) .
TIGHTENING TORQUE SPECIFICATION
| Center console to holder | ||
|---|---|---|
| Nut M6 | tightening torque | 4.6 Nm |
| M6x14 screw | tightening torque | 4.6 Nm |
- Tighten down screws (1) .
TIGHTENING TORQUE SPECIFICATION
| Center console to holder | ||
|---|---|---|
| Nut M6 | tightening torque | 4.6 Nm |
| M6x14 screw | tightening torque | 4.6 Nm |
- Tighten down screws (1) .
TIGHTENING TORQUE SPECIFICATION
| Center console to front bracket | ||
|---|---|---|
| Screw | tightening torque | 1.8 Nm |
- Tighten the screws (1) the right footwell.
TIGHTENING TORQUE SPECIFICATION
| Center console on heating and air-conditioning unit | ||
|---|---|---|
| Screw | tightening torque | 1.5 Nm |
- Tighten the screw (1) the left footwell.
TIGHTENING TORQUE SPECIFICATION
| Center console on heating and air-conditioning unit | ||
|---|---|---|
| Screw | tightening torque | 1.5 Nm |
Follow-up work
- Refer to INSTALLING RIGHT FOOTWELL TRIM .
- Refer to INSTALLING THE TRIM PANEL FOR THE PEDAL ASSEMBLY .
- Refer to INSTALLING THE CENTER STACK MODULE .
- Refer to INSTALLING THE WIRELESS CHARGING STORAGE .
- Refer to INSTALLING THE CUP HOLDER .
- Refer to INSTALLING THE CENTRAL INFORMATION DISPLAY (CID) .
- Refer to INSTALLING THE SPEAKER TRIM AT THE DASHBOARD .
- Refer to INSTALLING CENTER ARMREST .
- Refer to INSTALLING THE CENTER ARMREST STORAGE COMPARTMENT .
- Refer to INSTALLING THE REAR CENTER CONSOLE TRIM .
- Refer to ACTIVATING VEHICLE ELECTRICAL SYSTEM .