Fitting the emblem at the rear

Check 

• Check the guide pins (1)  and nozzles (2)  for damage.

Courtesy of BMW OF NORTH AMERICA, INC.

Result 

» The guide pins (1)  are damaged.

Measure

• Replace the emblem.

  Parts:  Emblem

Result 

» The nozzles (2)  are damaged.

Measure

• Replace the nozzles (2)  .

  Parts:  Grommets

• Coat the guide pins (2)  of the emblem (1)  with lubricant.

• Insert and press the emblem (1)  with the guide pins (2)  in the nozzles.

Courtesy of BMW OF NORTH AMERICA, INC.