Removing Self-Tapping Screws
Precondition
- Vehicle is secured on the straightening bench.
NOTE:
TECHNICAL INFORMATION
- Observe the procedure for repair stage 3.
For additional information see: 41 00... Repair method for repair stage 3
- For the stripping and rebuilding operations, refer to the surrounding text in Aftersales Information Research. See the FRU number.
Preliminary work
- Refer to SUPPLYING THE NEW PARTS REQUIRED .
Follow-up work
NOTE:
Schematic diagram is for example purposes. Some parts may differ in certain details.
- Remove the sealant with a wire brush attachment (1) .
- Completely remove the sealant from the screw head (2)
.
- Place the cordless drill (1) with the special tool 2 411 349 vertically on the flow-hole screw and loosen the flow-hole screw.