Removing the control unit for the Frontal Light Electronics (FLEL)

NOTE: RISK OF DAMAGE 
Electrostatic discharge. 
Damage to or destruction of electrical components. 

• Leave the electrical components in their original packaging until they are being installed. Only use the original packaging for returning the product. Always package removed components straight away.
• Read and comply with user information on using the associated special tool 12 7 060.
• Only tap the housings of electrical components. Do not tap pins or multi-pin connectors directly.
• Wear electrically conductive clothing and antistatic shoes (with ESD symbol).
• For additional information see: NOTES ON ESD PROTECTION (ELECTRO STATIC DISCHARGE) .

• Loosen screws (1).
• Pull the Front Light Electronics (2) control unit out of the headlights.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Unlock and disconnect connector (1).
• Remove the Front Light Electronics (2) control unit.

Courtesy of BMW OF NORTH AMERICA, INC.