Installing the anti-roll bar link
- Position the anti-roll bar link (4) on the anti-roll bar.
- Protect the shock absorber from damage with a cloth (1).
- Replace nut (2).
Parts: Nut
- Tighten nut (2). Counter support with a wrench (3) with Torx socket.
TIGHTENING TORQUE SPECIFICATIONS
| Rear anti-roll bar link on anti-roll bar | ||
| M10 Replace nut. | Tightening torque | 56 Nm |
- Replace the screw (2).
Parts: Screw
- Insert the screw (2) and position the anti-roll bar link (1) on the wheel carrier.
- Tighten down screw (1).
TIGHTENING TORQUE SPECIFICATIONS
| Rear anti-roll bar link to wheel carrier | ||
| M10 Replace screw. | Tightening torque | 56 Nm |
Follow-up work
- Refer to INSTALLING THE REAR LEFT WHEEL .