Installing the rear ride height sensor
- Position the rear ride height sensor (2).
- Tighten the screws (1).
TIGHTENING TORQUE SPECIFICATIONS
| Front/rear ride height sensor to holder | ||
| Oval-head screw | Tightening torque | 2 Nm |
- Connect connectors (2) and lock.
- Tighten nut (1).
TIGHTENING TORQUE SPECIFICATIONS
| Attachment rod to rear ride height sensor | ||
| M6 Replace nut. | Tightening torque | 8 Nm |
Follow-up work
- Refer to CARRYING OUT RIDE HEIGHT ADJUSTMENT .
- Refer to ADJUSTING HEADLIGHTS .
- Refer to RESETTING THE TIRE PRESSURE MONITOR .