Tightening the screw connection of the left and right camber link to the shock absorber

NOTE: Perform the steps on the left and right side.

Tightening the screw connection of the camber link to the shock absorber

Slacken the nut (1) by a turn and tighten it. Provide counter support to screw (2) in the process.

Courtesy of BMW OF NORTH AMERICA, INC.

TIGHTENING TORQUE SPECIFICATIONS

Rear shock absorber to the camber control arm
M12 Replace screw and nut. Tighten in the NORMAL POSITION . Tightening via nut.	Tightening torque	100 Nm
	Angle of rotation	90°