Remove rear brake rotor

NOTE: RISK OF DAMAGE
Failure to comply with the specification.
Component damage.

All specifications must be observed and complied with.

Release the screws (1) and remove the brake anchor plate in arrow direction.

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: TECHNICAL INFORMATION
Different variants may be installed depending on the vehicle equipment.
Loosen screws (1).
Remove the brake disk (2).

Courtesy of BMW OF NORTH AMERICA, INC.
Variants with carbon ceramic brake:

Screw in 2 (M8) screws into the internal thread (1) on the brake disc chamber.

Press the carbon-ceramic brake disc of the wheel hub shut.

Screw in screws evenly to avoid distortion of the brake disc chamber during removal.

G13692388

Courtesy of BMW OF NORTH AMERICA, INC.