Installing the rear axle support
- Get the repair screws (1)
and washers ready.
Parts: Repair screws, washers
CONSUMABLE SPECIFICATIONRepair screws (4x) with washers (4x) M12x1.5x115 07 14 7 426 660 37x2.5 31 33 6 776 760 - Lift the rear axle support to the dimension (A)
using the special tool 2 219 012
.
Dimension (A) = 3.5 cm
- It is (1) mandatory to screw in repair screws together with the washers and to apply them hand-tight. Make sure that the rear axle support remains lowered to the dimension (A) .
- Lower the special tool 0 495 817 (31 5 251) with the special tool 2 219 012 and place it to the side.