Installing the seal for the convertible top brace

NOTE: Perform the steps on the left and right side.

Insert the seal (1) for the convertible top brace at the seal carrier (2) in the arrow direction and position it.

Courtesy of BMW OF NORTH AMERICA, INC.
Fasten blind rivet (1).

Courtesy of BMW OF NORTH AMERICA, INC.
Fasten blind rivet (1).

Courtesy of BMW OF NORTH AMERICA, INC.
Insert the seal (1) for the convertible top brace at the convertible top frame (2).

Make sure that the seal is mounted without tension.

NOTE: To facilitate installation, coat the seal a little with water.

Courtesy of BMW OF NORTH AMERICA, INC.