Adjusting glass slide/tilt sunroof panel
Preliminary work
- Refer to CHECKING THE SETTING OF THE GLASS SLIDE/TILT SUNROOF PANEL .
- Refer to REMOVING THE BELLOWS FOR THE GLASS SLIDE/TILT SUNROOF .
- Close glass slide/tilt sunroof lid (2).
- Slacken screws (1) at the left and right such that the glass slide/tilt roof panel (2) can just be shifted.
- Shift the glass slide/tilt roof panel (2) until the right position is reached.
- Tighten down screws (1).
TIGHTENING TORQUE SPECIFICATIONS
| Panorama glass roof lid to mechanics | ||
| M5 Replace screws. |
Tightening Torque | 4.5 Nm |
Follow-up work