Installing The Rear Luggage Compartment Floor
- Pre-clean bonding surfaces on vehicle and on new part with cleaning agent R2.CONSUMABLE SPECIFICATION
Cleaning agent R2 500 ml 83190417324 - Clean bonding surfaces on vehicle and on new part with cleaning agent R1.CONSUMABLE SPECIFICATION
Cleaning agent R1 100 ml, Bottle 83192211217 - Apply adhesive K5 to the bonding surfaces.ADHESIVE SPECIFICATION
Body adhesive K5 50 ml 83192158654 - Install the new part and rivet in areas (1) to (3) with blind rivets N3.CONSUMABLE SPECIFICATION
Blind rivet N3
ø 4 mm; clamping area 1-3 mm83190301421 Installing the EMC screw
- Drill a hole with a diameter of 4.2 mm.
In the case of glued connections, only drill the hole after the adhesive has fully hardened.
- Screw in the EMC screw.CONSUMABLE SPECIFICATION
EMC screw SF Plus M5x15 83190301639 - Seal the EMC screw with the sealant.CONSUMABLE SPECIFICATION
Sealant D1 (seam sealing) 310ml 83422409985 - After the adhesive has hardened, install 3 EMC screws in the areas (1).CONSUMABLE SPECIFICATION
screw
EMC screw, SF Plus, M5x1583190301639